skip to main content
round parts grinding machine for brake discs and brake drums
S1 GRINDING LINEfor brake discs and brake drums

DEBURRING GRINDING MACHINE S1

Automatic grinding machine for casting finishing of brake discs and brake drums

EFFECTIVE REMOVAL OF BURRS AND SPRUES

The fully automatic grinding lines from Reichmann have been developed for the effective removal of burrs and sprues on the outside diameter - optionally on the inside diameter - in the harsh environment of a foundry.

The workpiece feed is fully automatic on a heavy roller conveyor with workpiece storage. After separation, the casting is positioned under NC control and hydraulically tensioned. To ensure unmanned production, the entire process is monitored. The castings are automatically removed from the system after the grinding process.

FEATURES

GRINDING UNIT FOR DEBURRING THE OUTSIDE DIAMETER

The grinding unit of the Reichmann deburring grinding machine is extremely robust and NC-controlled. Both the use of a corundum grinding tool, as well as a diamond grinding tool is possible.

FEEDING AND DISCHARGING OF CASTINGS

Fully automatic feed and removal of castings on hardened steel rollers. Perfect for the environment of a foundry.

OPTIONS

GRINDING UNIT FOR DEBURRING OF THE INSIDE BORE DIAMETER

Optionally, the grinding machine is available with an internal grinding unit. With the help of this unit, both the outer diameter, as well as the inner diameter can be ground simultaneously.

PLATE CONVEYOR SYSTEM

For non-rollable castings, the Reichmann deburring grinding machine S1 can be optionally equipped with a plate conveyor system.

AUTOMATIC MEASUREMENT

The brake discs can be automatically checked and measured after processing.

AUTOMATIC STACKING

Thanks to the robot palletizing system, the brake discs can be automatically placed in grid boxes according to predetermined stacking patterns.

SCOPE OF APPLICATION

The Reichmann grinding machine is suitable for the automatic casting finishing of

  • Brake discs for cars and trucks
  • Brake drums for cars and trucks
  • Clutch plates / Clutch pressure plates
  • flywheels
  • round parts

BEFORE - AFTERWARDS

YOUR BENEFIT

Thanks to the innovative concepts and the continuous development of our cutting and grinding systems, you have the following advantages:

  • Short cycle times (up to 5 seconds per casting)
  • Long lifetime of the tools
  • Consistent grinding quality
  • Fast product change possible
  • Intuitive operation of the grinding system

FACTS

TYPE diameter round parts cycle time
S1-C 220 - 420 mm 5 to 7 sec
S1-T 280 - 550 mm 15 sec