Rough grinding machine PME 60

The extra robust machine for high loads

The right machine for bulky workpieces

Compact rough grinding machine for cutting speed 60 or 80 m/s. Due to the grinding points drawn far to the outside, even bulky workpieces can be machined. The machine is prepared as standard with clamping flanges on the left to accept grinding wheels 230x20x22 mm and on the right for cut-off wheels 230x4x22 mm.

The machine is available for wheel diameter 300 mm at an extra charge.

Rough grinding machine with directly driven spindle shaft.

Designed in robust construction for extreme load. The machines are available either for cutting speed 30 m/s or for 45 m/s. For side grinding of flat workpieces we recommend the massive side support table SAS in connection with screwed-on grinding rings. The clear height from the upper edge of the table to the protective hood cutout, which is referred to as the available grinding height, is 200 mm for the 500 ring and 260 mm for the 600 ring.